Lighting That Fits Your Space Correctly

Sergeant Electric installs and repairs indoor and outdoor lighting throughout Lansing, Michigan.

The right lighting changes how a room looks and how safely you can move through your home at night. If your Lansing home has dim hallways, a front porch that stays dark after sunset, or a dining room fixture that flickers every time you flip the switch, the lighting system is not doing its job. Fixtures wear out, wiring connections loosen, and older switches fail over time.

Sergeant Electric installs recessed lights, pendant fixtures, chandeliers, and outdoor lighting for security and visibility. Replacements address outdated or broken fixtures that no longer work properly, and repairs fix flickering, wiring faults, and switch problems that keep lights from turning on. Once new fixtures are installed and wiring is secured, rooms are evenly lit, outdoor areas stay visible after dark, and switches work reliably without buzzing or sparking.

If you need new lighting installed or existing fixtures repaired in Lansing, reach out to Sergeant Electric to schedule the work.

What Happens During Fixture Installation

Sergeant Electric shuts off power to the circuit, removes the old fixture, and inspects the junction box and wiring for damage or loose connections. In Lansing, older homes sometimes have cloth-insulated wiring or boxes that are not rated for heavy fixtures, and those issues are corrected before the new fixture is mounted. The fixture is wired to the circuit, secured to the box, and tested to confirm it operates correctly from the switch.

After installation, you will notice that lights turn on instantly without delay, bulbs last longer because connections are tight, and rooms are lit evenly without dark corners. Outdoor lighting stays on when you need it and does not trip breakers during storms.

Recessed lighting is installed by cutting holes in the ceiling, running wire between joists, and securing housings that are rated for insulation contact if insulation is present. Outdoor fixtures are mounted to weatherproof boxes and sealed to prevent water from entering the electrical system.

Common Concerns Before Installation

Homeowners in Lansing often want to know whether their current wiring can support new fixtures, what causes flickering, and how outdoor lighting should be positioned for safety.

What causes lights to flicker?
Flickering happens when connections are loose, when the bulb is not seated properly, or when the switch is wearing out. If multiple lights flicker on the same circuit, the problem may be at the panel or in the wiring between fixtures.
Can I install a heavier chandelier on my existing box?
Standard ceiling boxes support fixtures up to 50 pounds, and heavier chandeliers require a fan-rated or heavy-duty box anchored to a ceiling joist. Sergeant Electric replaces the box if needed before mounting the new fixture.
Why do outdoor lights keep burning out bulbs?
Bulbs burn out quickly when fixtures are not sealed properly and moisture gets inside, or when voltage spikes occur during storms. Sergeant Electric installs weatherproof fixtures and can add surge protection if your area experiences frequent power fluctuations.
How many recessed lights do I need for a room?
The number of recessed lights depends on room size, ceiling height, and how much light you want. A general rule is one light per 25 square feet, but Sergeant Electric evaluates your layout and recommends spacing that eliminates dark spots.
What is the difference between indoor and outdoor rated fixtures?
Outdoor fixtures are sealed against moisture and rated to withstand temperature changes, UV exposure, and rain. Indoor fixtures are not weatherproof and will fail quickly if installed outside.

If your lights flicker when you turn them on or your outdoor fixtures stopped working after the last storm, Sergeant Electric can diagnose the issue and install replacements that hold up in Lansing. Get in touch to set up an appointment.